Covering Bury St Edmunds and the surrounding area Monday to Friday 0900 to 1700 Request a call-out

High Pressure Water Jetting in Glemsford - The Job From Start to Finish

If you have never had a drain jetting job done at a Glemsford property before, here is a clear account of what the work actually involves from the moment the team arrives to when they leave.

Est. 2025 Told what it will cost before we start You see what was wrong Cleared up before we leave
High Pressure Water Jetting - work in progress

On arrival, the drainage contractor will want to locate the relevant inspection chambers, rodding eyes or gully access points. This takes a few minutes and involves lifting covers to check the direction of flow and get a view of the pipe condition and the nature of any visible blockage. If a camera survey has not been done previously and the blockage has recurred or the pipe age is uncertain, a CCTV run at this stage provides a clear picture before any pressure is applied. The jetting unit - mounted in or on the vehicle - is connected to a water supply, usually from the site's tap or a water tank on the vehicle, and the hose is fed into the drain through the access point.

The jetting head is pushed along the pipe under pressure, with the rotating nozzle cutting through accumulated grease, silt, scale or root matter as it moves. For heavy grease build-up, a chain flail or specialist grease-cutting nozzle may be used in place of the standard rotary head. The hose is then pulled back slowly, drawing loosened debris towards the access chamber. A second pass confirms the pipe is running clear. Debris collected in the chamber is scooped out and bagged, the access point is replaced, and the working area - gully, driveway or chamber surround - is rinsed and left clean. At that point the job is done: the pipe should run freely and the contractor will advise on any findings that point to a longer-term issue, such as a cracked joint or sign of root intrusion, that may need attention in future.

What you get

  • Chambers lifted and the run checked, so the work starts from what is actually happening rather than from the symptom.
  • The blockage cleared with the right tool for the pipe: rods, a machine or the jetter, chosen so the pipe is not damaged getting through it.
  • The cause looked for once it runs, on camera where it is not obvious from the chamber.
  • What we found explained in plain words, with stills or footage if you want them.
  • The area washed down and the covers back properly before we leave.

High Pressure Water Jetting in Glemsford?

Ring and speak to the engineers who will be doing the work, or send the form with the postcode and what is happening.

Call Call-out