Covering Bury St Edmunds and the surrounding area Monday to Friday 0900 to 1700 Request a call-out

Patch Liners and No-Dig Drain Repairs in Glemsford - The Job From Start to Finish

A patch liner repair in Glemsford follows a clear sequence of steps, and knowing what each one involves helps you understand what you are paying for and what to expect on the day.

Est. 2025 Told what it will cost before we start You see what was wrong Cleared up before we leave

The job starts with access and assessment. The engineer locates the nearest upstream and downstream inspection chambers and feeds a CCTV camera through the pipe. The footage is reviewed on-site to confirm the fault type, position and dimensions. From that, the correct patch length and resin mix are selected, and the liner sock is cut, wetted with resin and allowed to reach working viscosity. Meanwhile the pipe is high-pressure jetted if any debris or root material is present, since lining over an obstruction will shorten the repair's service life. The insertion equipment is set up at the access point and the patch is loaded.

Under camera guidance, the patch is pushed to the exact fault location and the bladder is inflated to press the resin-soaked liner firmly against the host pipe wall. Inflation pressure and cure time depend on the resin system and ambient temperature; the engineer monitors both before deflating and withdrawing the bladder. A final camera pass confirms the patch is seated with no voids or lifted edges, that flow is restored and that no secondary faults have been missed. The engineer refits all covers, removes equipment and clears the working area. You are shown the post-repair footage before the job is signed off, giving you a permanent record of the completed work.

What you get

  • A survey first, so the repair is designed around what the pipe is actually doing.
  • The liner or patch cured in place through an existing chamber, with nothing dug up to reach it.
  • A second camera run after curing, so you can see the finished repair rather than take our word for it.
  • An honest answer where lining is not the right call, and what digging it would involve instead.

Patch Liners / No-Dig Repairs in Glemsford?

Ring and speak to the engineers who will be doing the work, or send the form with the postcode and what is happening.

Call Call-out